Kitbash case study – Eagle Gunship

While completing my Eagle Crash diorama, I decided to show the passenger pod door of the crashed Eagle ajar, suggesting that the door had been forced open due to electrical failure. This required buying a second MPC Eagle kit to obtain a “spare” door, after carving away the original door (the door is molded into the side of the passenger pod). The timing was right, since MPC had just re-released their Eagle kit with a much improved decal sheet which I was also able to put to use.

Having updated the crashed Eagle to show the door ajar, I was left with a box full of spare parts (almost enough to build another Eagle). I decided to try my hand at a new design. And so began the design and construction of the Eagle Gunship. But first, a bit of background on the Eagle.

The Eagle is the all-purpose workhorse of Moonbase Alpha, carrying passengers as well as freight. The producers of Space: 1999 never made its military capabilities very clear. In Season 1 of the series, Eagles were occasionally shown firing lasers from a point on the underside of the Command Module. And in Season 2, at least one Eagle was fitted with a retractable laser turret housed in the forward Service Module. These enhancements were obviously added as afterthoughts to facilitate specific storylines writers had come up with. Space: 1999 suffered from a notorious lack of consistency in terms of the technical features and capabilities of Moonbase Alpha and its associated hardware. The series would have benefitted from a technical guidebook similar to the one shared by Star Trek writers to ensure consistency.

Nevertheless, the Brian Johnson-designed Eagle remains a classic in the annals of science fiction, and the real star of Space: 1999. Fictional spacecraft often forego realism for visual appeal, but the Eagle succeeds on both counts. The design is practical as well as aesthetically pleasing, with a modular approach which invites customization. So, leveraging the strong DNA of this classic design, I decided to create an Eagle variant designed specifically for warfare.

The Eagle Gunship is armed with two forward mounted laser guns and two guided missiles. It features main and auxiliary forward propulsion engines, vertical jets for liftoff, and fixed landing skids set wide apart for stability. Access is via a door at the rear of the Command Module. The Gunship’s compact size optimizes the thrust to weight ratio and makes the ship difficult for the enemy to locate and track.

In addition to parts and decals from the MPC kit and landing skids taken from MPC’s Darth Vader’s Tie Fighter kit, the Eagle Gunship build utilized sheet styrene, sheet acrylic, Apoxie Sculpt, aftermarket resin missiles, and various odds and ends from the parts bin. The decals didn’t behave like regular decals. The film was thicker than normal and didn’t respond well to Solvaset. However they came out okay and were quicker than painting.

Nose Subassembly

Engine Subassembly

I had to make some changes to the design during construction. The two spars behind the Command Module were originally conceived as being much slimmer, but more surface area was needed to support the engines, fuel tanks, vertical jets, and maneuvering thrusters. So the spars ended up being wider than originally planned.

When the model was initially completed, it was front-heavy and leaned forward on the landing skids. Adding two auxiliary engines at the back of the ship (made of lead) made the model balance nicely.

After finishing the Eagle Gunship, I realized that it would make a great addition to the Eagle Crash diorama. It’s close enough visually to the other two Eagles to blend into the scene, and different enough to make viewers take a second look.

-Ivar