Tag Archives: Round 2

New 1:350 K’t’inga and a Klingon Battlecruiser retrospective

Star Trek fans will be delighted to hear that Round 2 has announced a 1:350 Klingon K’t’inga Battlecruiser kit, scheduled for September 2018 release.  The kit is based on the miniature which appeared in Star Trek: The Motion Picture and will no doubt conform to Round 2’s high standards of detail and accuracy.

Until now, Trek modellers interested in a 1:350 scale kit of the venerable Klingon ship have had to rely on expensive limited run resin kits. These “garage kits” tend to be relatively costly since independent producers cast the pieces by hand, which is a time consuming process. These producers also pay retail for the resin which goes into the kits, so raw material costs are high. The result is that garage kit prices are never competitive with mass produced injection molded kits. Moreover, the kits require substantially greater modelling skills, and a great deal of patience is often needed to correct surface imperfections in the parts if the quality of the resin is not up to par.

Pricing for a resin garage kit of the K’t’inga could easily run upwards of $USD 500, whereas Round 2 will be offering the kit through dealers at a suggested retail price of $USD 100. This is an incredible bargain. Moreover, the injection molding of the kit means that lighting can be incorporated quite easily (a separate lighting kit will be offered later). Full details of the release are available on Round 2’s website.

The K’t’inga is a fascinating design (as Spock would say), connecting an insectoid pod-shaped head to a delta wing body via a long tubular member. The angled down wingtips terminate in beefy warp nacelles, giving the ship a powerful, broad shouldered look. The K’t’inga’s impulse drive gives off a flickering red glow (the flicker being unique to Klingon technology) which further enhances the menacing look of the ship.

The battlecruiser from the original Star Trek series was designed by Matt Jefferies, who also designed the Enterprise. According to Wikipedia, “the D7-class battlecruiser was designed … to mimic the appearance of a manta ray,” and Jefferies wanted it to appear “threatening, even vicious.”

The K’t’inga which emerged in the Trek films many years later retained most of the original D7 design. The changes were largely cosmetic, consisting mainly of tweaking the geometry and adding surface detail to impart a better sense of scale.

The K’t’inga has made many a bold appearance in the Star Trek films. One of the most memorable was the opening sequence of Star Trek: The Motion Picture, which featured three of these magnificent ships facing off against V’ger. This sequence stands as one of the finest visual tributes ever made to a Trek vessel, showcasing the K’t’inga in its full splendour to the backdrop of a rousing martial soundtrack. Although the film was a critical failure, the producers got one thing right, which was giving plenty of screen time to the iconic vessels of Star Trek. 

Modellers will have no shortage of inspiration to create a diorama featuring the ship, although working in 1:350 scale will confine this pursuit to those with lots of space!

If you like to build dioramas and want to learn more about how to optimize the visual impact of your work, you might like my new book, Diorama Design. It’s available in both ebook and print formats at Amazon.

-Ivar

A deluxe diorama for Space: 1999 fans

Round 2 has released a 1:48 scale Nuclear Waste Area 2 Diorama Set which will delight fans of the 1970s TV show Space: 1999. Few sci-fi programs have generated such mixed feelings among viewers. On one hand, Brian Johnson’s special effects, taking direct inspiration from 2001: A Space Odyssey, were miles ahead of anything else on TV at the time. On the other hand, the stories lacked drama and failed to capture viewers’ attention, leading to the series being cancelled after two seasons.

Love it or hate it, Space: 1999 has stood the test of time. Its fan base is still going strong nearly half a century after the show’s cancellation. This has created demand for countless model kits and diecast replicas of the show’s wonderful hardware over the years. Which brings us to Round 2’s latest offering.

The Nuclear Waste Area 2 Diorama Set recalls “Breakaway,” the pilot episode of Space: 1999. In a last minute attempt to avert disaster, Eagle Transporters are dispatched to disperse nuclear waste canisters from the waste area before they can detonate. The attempt is unsuccessful and a massive explosion throws the moon out of earth’s orbit, setting the scene for two seasons of sci-fi adventures.

The kit includes the following:

  • 8x Lamp Posts with plug & play LED lights (requires 4 AA batteries – not included)
  • 2x Lamp Post Bases
  • 10x Figures in mix-and-match poses
  • 2x Moon buggies with cargo
  • 2x Nuclear Waste Control Cones
  • 2x Waste Containment Platforms
  • 8x Hexagonal Storage Boxes

These components can be used alone or in conjunction with Round 2’s 1:48 Eagle kit to create any number of scenes. All that’s missing is a lunar terrain base, which the resourceful diorama artist can tackle on his own. The really ambitious modeller could add a launch pad and crane to complete the scene. Round 2’s choice of 1:48 scale means that the diorama will have a very big footprint, especially if an Eagle is added.

The initial release of the kit also includes a 1:24 scale moon buggy. This is a curious addition given that it obviously won’t work in the same diorama as the other items. The upside is that the moon buggy could be a precursor to other 1:24 scale kits to come. The laser tanks from “The Infernal Machine” (Season 1, Episode 21) would be an excellent choice. Let’s keep our fingers crossed.

If you like to build dioramas and want to learn more about how to optimize the visual impact of your work, you might like my new book, Diorama Design. It’s available in both ebook and print formats at Amazon.

-Ivar